Add numbers to the junk fax list
There are two ways to add a number to your junk list. You can select numbers from your
caller ID history, or you can enter new numbers. The numbers in your junk list will be
blocked if Block Junk Fax mode is set to On.
To select a number from the caller ID list
1.
Press Setup.
2.
Press 4 and then press 7.
This selects Basic Fax Setup and then selects Junk Fax Blocker Set Up.
3.
Press 1, and then press 1.
This selects Add Number to Junk List and then selects Select Number.
4.
Press to scroll through the numbers from which you have received faxes. When
the number you want to block appears, press OK to select it.
5.
When the Select Another? prompt appears, do one of the following:
•
If you want to add another number to the list of junk fax numbers, press 1
to select Yes, and then repeat step 4 for each number you want to block.
•
If you are done, press 2 to select No.
To manually enter a number to block
1.
Press Setup.
2.
Press 4, and then press 7.
This selects Basic Fax Setup and then selects Junk Fax Blocker Set Up.
3.
Press 1, and then press 2.
This selects Add Number to Junk List and then selects Enter Number.
4.
Use the keypad to enter a fax number to block and then press OK.
Make sure you enter the fax number as it appears on the display, and not the fax
number that appears on the fax header of the received fax, as these numbers can be
different.
5.
When the Enter Another? prompt appears, do one of the following:
•
If you want to add another number to the list of junk fax numbers, press 1
to select Yes, and then repeat step 4 for each number you want to block.
•
If you are done, press 2 to select No.