Before you call HP customer support
Software programs from other companies might be included with the HP All-in-One. If you experience
problems with any of those programs, you will receive the best technical assistance by calling the
experts at that company.
NOTE:
This information does not apply to customers in Japan. For information on service
options in Japan, see
HP Quick Exchange Service (Japan)
.
If you need to contact HP Customer Support, do the following before you call:
1.
Make sure that:
a. The HP All-in-One is plugged in and turned on.
b. The specified print cartridges are installed correctly.
c. The recommended paper is properly loaded in the input tray.
2.
Reset the HP All-in-One:
a. Turn off the HP All-in-One by pressing the Power button.
b. Unplug the power cord from the back of the HP All-in-One.
c. Plug the power cord back into the HP All-in-One.
d. Turn on the HP All-in-One by pressing the Power button.
3.
To find support and warranty information, go to the HP website at
www.hp.com/support
. If
prompted, choose your country/region, and then click Contact HP for information on calling for
technical support.
Check the HP website for updated information or troubleshooting tips for the HP All-in-One .
4.
If you are still experiencing problems and need to speak with an HP Customer Support
Representative, do the following:
a. Have the specific name of the HP All-in-One, as it appears on the control panel, available.
b. Print a self-test report.
c. Make a color copy to have available as a sample printout.
d. Be prepared to describe your problem in detail.
e. Have your serial number and service ID ready.
5.
Call HP Customer Support. Be near the HP All-in-One when you call.
Related topics
•
Print a self-test report
•
Access your serial number and service ID