HP Officejet J5730 - Set up the HP All-in-One for faxing

background image

Set up the HP All-in-One for faxing

Before you begin setting up the HP All-in-One for faxing, determine which kind of phone
system your country/region uses. The instructions for setting up the HP All-in-One for
faxing differ depending on whether you have a serial- or parallel-type phone system.

If you do not see your country/region listed in the table below, you probably have a
serial-type phone system. In a serial-type phone system, the connector type on your
shared telephone equipment (modems, phones, and answering machines) does not
allow a physical connection to the "2-EXT" port on the HP All-in-One. Instead, all
equipment must be connected at the telephone wall jack.

NOTE:

In some countries/regions that use serial-type phone systems, the phone

cord that came with the HP All-in-One might have an additional wall plug attached
to it. This enables you to connect other telecom devices to the wall jack where
you plug in the HP All-in-One.

If your country/region is listed in the table below, you probably have a parallel-type
telephone system. In a parallel-type phone system, you are able to connect shared
telephone equipment to the phone line by using the "2-EXT" port on the back of the
HP All-in-One.

NOTE:

If you have a parallel-type phone system, HP recommends you use the

2-wire phone cord supplied with the HP All-in-One to connect the HP All-in-One
to the telephone wall jack.

Table 4-1 Countries/regions with a parallel-type phone system

Argentina

Australia

Brazil

Canada

Chile

China

Colombia

Greece

India

Indonesia

Ireland

Japan

Korea

Latin America

Malaysia

Chapter 4

24

Finish setting up the HP All-in-One

background image

Mexico

Philippines

Poland

Portugal

Russia

Saudi Arabia

Singapore

Spain

Taiwan

Thailand

USA

Venezuela

Vietnam

If you are unsure which kind of telephone system you have (serial or parallel), check with
your telephone company.

Choose the correct fax setup for your home or office

Select your fax setup case

Case A: Separate fax line (no voice calls received)

Case B: Set up the HP All-in-One with DSL

Case C: Set up the HP All-in-One with a PBX phone system or an ISDN line

Case D: Fax with a distinctive ring service on the same line

Case E: Shared voice/fax line

Case F: Shared voice/fax line with voice mail

Case G: Fax line shared with computer dial-up modem (no voice calls received)

Case H: Shared voice/fax line with computer dial-up modem

Case I: Shared voice/fax line with answering machine

Case J: Shared voice/fax line with computer dial-up modem and answering machine

Case K: Shared voice/fax line with computer dial-up modem and voice mail